KRAK LLC

Offline Layout for Windows Embedded Compact 7

February 14, 2012
3 Comments

Offline Layout

clip_image002

Offline Layout is a new feature that has been released with the latest update of Windows Embedded Compact 7 and Windows Embedded Silverlight Tools. This feature can create a reusable layout of all the content a user would need to install, modify, or repair the software. The big advantage of this feature is that the update patches will only need to be downloaded once. Now, when patches need to be acquired, the layout folder can be used as the source.

Overview:

1. Select the options you want to add to your offline layout.

2. Select “Yes, create an offline layout.”

3. Allow offline layout to be created.

Quick tips:

· Have the original install DVD’s close by. It is quicker to use the DVD’s as a source rather than downloading. Note not all options are available for download.

· When updating and performing the offline layout only the options currently installed will be saved to the offline layout folder.

· Offline layout will only add files to the layout folder. It will never delete files from the folder.

· The folder can be shared to enable network access and the folder content can be copied anywhere.

· Uninstalling the software will not remove the offline layout folder or its content.

For more details read section below:

So how does one perform an offline layout? It is very simple. If you are installing for the first time or modifying a current install you will see a new screen titled “Install Offline Layout”. See Below:

clip_image004

By default, offline layout is not selected. Select “Yes, create an offline layout” to enable offline layout.

clip_image006

When “Yes, create an offline layout.” is selected, new controls appear on the screen. The location of where the layout folder will be created and an additional check box are displayed. This check box can be unchecked to allow only the creation of the offline layout folder without installing the product. In this case any currently installed options will not be modified. For this demonstration, I’ll leave the check box checked and click next.

The “Ready to Proceed” screen will appear, and a new icon may be displayed.

clip_image008

In this scenario, Platform Builder is being modified to the update 3 level, so the Update 6 patch is being removed. Update 3 is already applied to Platform builder, so only the offline layout action is performed on that package. ARMv5 is also being installed, hence the installation of Architecture Common updates.

This floppy disk icon is displayed when a package is planned to be saved to the offline layout folder, and no other action is being taken with the package.

clip_image010

Packages that are being installed or modified will also be saved in the offline layout folder.

The estimated size of the offline layout is displayed and added to the total disk space required.

· Tip: at this point it is a good idea to have your original install media handy.

· If your system has AutoRun enabled a second instance of the installer may start. Close it down if it does.

clip_image012

Once the acquire phase has completed the offline layout action will begin. The packages will be saved and the modify phase will begin. Once all modifying is complete the “Finished” screen will display.

clip_image014

The location of the offline layout folder is displayed as a link. Click on this link to open the offline layout folder.

clip_image015

The layout folder will contain the packages required for installing the options that have been selected. This includes any updates that the options may have. Performing a Full install with Offline layout will result in a layout folder like the shown below.

clip_image016

I have found that the quickest and easiest process is to update your current install to 7.0.2810 (Update7) without performing the Layout action. Then drop the Windows Embedded Compact 7 DVD into the drive and proceed to perform layout only action on all of the options you may ever want to install. From here on forward only new update folders will need to be acquired.

Links to more information:

http://blogs.msdn.com/b/icumove/ (Official Install Blog)